One of the greatest aspects of woodflooring is that the older it becomes, it DOES NOT lose its value. If anything, it's proven to increase the value of one's home and you can refresh it any time.
Whether you are sanding and finishing an older floor or a newly installed wood floor the process is basically the same. The following videos will give you a nice presentation of the equipment needed as well as the process to complete the sanding and finishing of wood flooring.
To be certain the sanding and finishing information you obtain is the best direction for your next project, be sure to check with Morwood Flooring Inc. in Palm Beach County, Florida for an expert opinion on this as well as information about sanding and finishing of wood flooring. They are located at 3201 North Dixie Highway in Boca Raton and can be reached at 954-658-2691.
Part 1-Getting Prepared
Understanding the project before you is quite important and knowing the characteristics of wood and finishes is key to a successful job. There are conditions you need to be aware of that may make your job tougher to handle. Knowing these potential issues will help you decide whether to tackle the job yourself, or hire a professional wood flooring finisher.
Part 2-Equipment Needed
After making the decision to tackle a sanding and finishing job, you will need to get the proper equipment. Choosing the right equipment and supplies will make any job go smoother. Learning how to operate your equipment efficiently and safely is a must. Just as in any aspect of life, practice makes perfect and don't expect to be a professional sander and finisher the first time!
Part 3-Preparation For Sanding
Know your plan of attack! Moisture issues, pattern or direction of the wood floor, can change the machinery or technique you will use. Figuring these things out ahead of time and preparing ahead with tools and equipment will save you a lot of headaches.
Part 4-The Sanding Process
Choosing the proper grit(roughness) of sandpaper is essential and will facilitate the flow of the job. Watching these videos can help you understand the nuances of each machine and how to get the best results with each one......
Part 5-Finishing Process
The sanding is now complete and it's almost time to apply a finish. Tacking and cleaning the wood flooring will remove dust the vacuum may have missed. There is a wide variety of finishes to use including waterborne products, oil based polyurethanes and a host of other products that each can offer a different look or environmental impact. Do your research on these products and know what you are putting on your floors. This part of the job is what you will look at for a long time. Good Luck!
Morwood Flooring Inc. in Palm Beach County, Florida will provide an expert opinion on this topic as well as information about sanding and finishing of wood flooring. They are located at 3201 North Dixie Highway in Boca Raton and can be reached at 954-658-2691.
